Several types of labor safety shoes

(1) insulating shoes.

The role of insulating shoes is to minimize the risk of electric shock. Because the electric current is flowing into the ground through the human body through the contact point when the electric shock occurs, it is necessary to wear not only insulating gloves, but also insulating shoes in electrical work. According to the pressure range, 20kV, 6kV and 5kV insulation shoes should be selected according to the scope of operation. Insulation shoes should be checked and maintained regularly. If they are seriously affected by moisture or wear, they will not be able to protect them.

(2) safety shoes.

Safety shoes are also known as toe protection shoes, mainly to prevent objects from damaging feet and toes. For example, when carrying heavy objects or loading and unloading materials, rolling drums, heavy pipes touching the feet or accidentally kicking sharp metal plates, etc. The front cover of the shoe is lined with metal materials with good impact resistance, high strength and light weight. The strength and impact resistance of the front cover of the shoe should be tested before it can be used. Attention should be paid to choosing different safety shoes according to the weight of the work.

(3) antistatic and conductive shoes.

Anti-static shoes are used to prevent accidents caused by static electricity and to avoid accidental electric shock to human body caused by 220V power frequency capacitor equipment. Conductive shoes are used in places where fire and explosion may be more sensitive to human body static electricity. Some of these shoes are safety shoes and rubber shoes with anti-static or conductive soles, the whole shoe does not need metal, to reduce the possibility of friction fire. When shoes are used, resistance tests are required. Then test regularly to ensure that the maximum resistance of the shoe does not exceed the allowable value.

(4) steelmaking shoes and shoe covers.

This kind of shoes, also known as casting shoes, mainly prevents the burning and scalding of feet. This kind of shoes should be pressure-resistant, not easy to burn, the upper has oil-soaked Kraft leather and canvas inlaid leather, the soles are tire bottom lined with cowhide. In order to prevent scalding of molten metal splash, high waist and easy to remove patterns are adopted. The shoe covers can also be used to cover the shoes and trouser legs, and the shoe covers are made of canvas, asbestos and aluminum film.

(5) cold proof shoes.

Suitable for cold and low temperature environment, cotton shoes, fur boots and felt boots, etc., with good insulation performance.

(6) rubber boots.

According to its uses, there are anti acid boots, waterproof boots, oil proof shoes and so on. Anti-acid and alkali boots are suitable for the ground where there are acid and alkali and other corrosive liquids. They are made of acid and alkali-resistant rubber, and there are also acid and alkali-proof trousers and boots joined together. Water-proof boots are used for the work of water accumulation or splashing. The basic material is rubber, including miner's water-proof boots, aquatic special boots, transplanting boots, etc. Anti-grease shoes are used for oil-stained work on the ground, made of rubber or polyethylene plastic, shoes, etc.